Amir Faghri - Journals

202. Bahrami, H, and Faghri, A, “Start-Up and Steady-State Operation of a Vapor-Feed Direct Methanol Fuel Cell Fed with Pure Methanol,” International Journal of Hydrogen Energy , Vol.37.No. 10, 2012, pp. 8641-8658.

201. Wang, S., Faghri, A., and Bergman, T.L, “Transient Natural Convections in Vertical Annuli: Numerical Modeling and Heat Transfer Correlation,” Numerical Heat Transfer A, Vol. 61, 2012, pp. 823-836.

200. Shabgard, H.,Robak, C.W, and  Bergman, T.L, and Faghri, A. , “Heat Transfer and Exergy Analysis of Cascaded Latent Heat Thermal Energy Storage with Gravity-Assisted Heat Pipes for Concentrating Solar power applications,” Solar Energy, Vol.86, No.3, 2012, pp. 816-830.

199. Wang, S., Faghri, A., and Bergman, T.L, “ A comparison Study of  Sensible and Latent Thermal Energy Storage Systems for Concentrating Solar Power Applications,”  Numerical Heat Transfer A, Vol. 61, 2012, pp. 860-871

198.  Sharifi, N., Wang, S., Bergman, T.L., and Faghri, A.,   “Heat Pipe-Assisted Melting of a Phase Change Material,” International Journal of Heat and Mass Transfer  , Vol.55, No. 13-14,2012, pp. 3458-3469.

197. Wang, S., Faghri, A., and Bergman, T.L,” Melting in Cylindrical Enclosures: Numerical Modeling and Heat Transfer Correlations.” Numerical Heat Transfer A , Vol. 61, 2012, pp. 837-859.

196. Shabgard, H., and Faghri, A., "Performance Characteristics of Cylindrical Heat Pipes with Multiple Heat Sources," Applied Thermal Engineering, Vol. 31, 2011, pp. 3410-3419.

195. Sharifi, N, Bergman, T.L, and Faghri, A "Enhancement of PCM Melting in Enclosures with Horizontally-finned Internal Surfaces," International Journal of Heat and Mass Transfer, Vol.54, No.19-20, 2011, pp. 4182-4192.

194. Robak, C.W, Bergman, T.L, and Faghri, A., "Economic Evaluation of Latent Heat Thermal Energy Storage Using Embedded Thermosyphons for Concentrating Solar Power Applications," Solar Energy , No.85 ,2011, pp. 2461--2473.

193. Ward, T. and Xu, C., and Faghri, A., "Performance and Design Analysis of Tubular-Shaped Passive Direct Methanol Fuel Cells" International Journal of Hydrogen Energy , Vol.36, 2011, pp. 9216-9230.

192. Ward, T., Li, L. and Faghri, A. "Performance Characteristics of a Novel Tubular-Shaped Passive Direct Methanol Fuel Cell," Journal of Power Sources, Vol.196, 2011, pp. 6264-6273.

191. Li, X.L., and Faghri, A., "Effect of the Cathode Open Ratios on the Water Management of a Passive Vapor --feed Direct Methanol Fuel Cell Fed With Neat Methanol," Journal of Power Sources, Vol.196 ,2011 , pp. 6318-6324.

190. Xu, C, Faghri, A. , and Li, X.L., " Improving the Water Management and Cell Performance for the Passive Vapor- feed DFMC Fed with Neat Methanol," International Journal of Hydrogen Energy, Vol. 36 ,2011, pp. 8468-8477.

189. Aghvami, M., and Faghri, A., "Analysis of Flat heat pipes with Various Heating and Cooling Configurations," Applied Thermal Engineering, Vol. 31, No.14-15, 2011, pp. 2645-2655.

188. Xu, C, and Faghri, A., "Analysis of an active tubular liquid-feed direct methanol fuel cell," Journal of Power Sources ,Vol. 196, No. 15, 2011, pp. 6332-6346.

187. Robak, C.W, Bergman, T.L, and Faghri, A., "Enhancement of Latent Heat Energy Storage Using Embedded Heat Pipes," International Journal of Heat and Mass Transfer ,Vol.54, No. 15-16, 2011 , pp. 3476-3484.

186. Bahrami, H, and Faghri, A., "Water Management in a Passive DMFC using Highly Concentrated Methanol Solution," ASME Journal of Fuel Cell Science and Technology , Vol.8, No.2, 2011, pp. 021011(1-15)

185. Li, X, and Faghri, A., "Local Entropy Generation Analysis on Passive High --concentration DMFC s ( Direct Methanol Fuel Cell ) with Different Cell Structures," Energy, Vol. 36, 2011, pp. 403-414.

184. Bahrami, H, and Faghri, A. "Exergy Analysis of a Passive Direct Methanol Fuel Cell," Journal of Power Source, Vol. 196, 2011, pp. 1191-1204.

183. Wang, S., Faghri, A., and Bergman, T.L, "Numerical Modeling of Alternative Melting and Solidification," Numerical Heat Transfer, Part B , Vol. 58, 2010, pp. 393-418.

182. Li, X, Faghri, A., and XU, C., "Structural Optimization of the Direct Methanol Fuel Cell Passively Fed with a High --concentrated Methanol Solution," Journal of Power Sources, Vol.195, 2010, pp.8202-8208.

181. Xu, C, Faghri, A., Li, X.L. and Ward, T., "Methanol and Water Crossover in a Passive Liquid- feed Direct Methanol Fuel Cell," International Journal of Hydrogen Energy, Vol.35, 2010, pp. 1769-1777.

180. Xu, C, and Faghri, A. "Mass Transport Analysis of a Passive Vapor Feed Direct Methanol Fuel Cell," Journal of Power Sources, Vol. 195, 2010, pp. 7011-7024.

179. Bahrami, H, and Faghri, A, " Transient Analysis of a Passive Direct Methanol Fuel Cell Using Pure Methanol," Journal of The Electrochemical Society, Vol.157, No. 12, 2010, pp. B1762-B1776.

178. Xu, C, Faghri, A., and Li, X., " Development of a High Performance Passive Vapor -feed DMFC Fed with Neat Methanol," Journal of The Electrochemical Society, Vol. 157, No. 8, 2010, pp. B1109-B1117.

177. Li, X. L., Faghri, A. and XU, C., "Water Management of the DMFC Passively Fed with Highly Concentrated Methanol Solution," International Journal of Hydrogen Energy, Vol. 35, 2010, pp. 8690-8698.

176. Xiao, B, Bahrami, H, and Faghri, A "Analysis of Heat and Mass Transfer in a Miniature Passive and Semi-Passive Liquid-Feed Direct Methanol Fuel Cell (DMFC)." Journal of Power Sources, Vol. 195, 2010, pp. 2248--2259.

175. Shabgard, H., Bergman, T.L., Sharifi, N. and Faghri, A., "High Temperature Heat Pipe Thermal Energy Storage," International Journal of Heat and Mass Transfer, Vol. 53, 2010, pp. 2979-2988.

174. Bahrami, H, and Faghri, A., "Transport Phenomena in a Semi-Passive Direct Methanol Fuel Cell (DMFC)," International Journal of Heat and Mass Transfer, Volume 53, No. 11-12, 2010, pp. 2563-2578.

173. Xu, C, and Faghri, A., "Effect of the Capillary Property of Porous Media on the Water Transport Characteristics in a Passive Liquid-Feed Direct Methanol Fuel Cell (DMFC)," ASME Journal of Fuel Cell Science and Technology, Vol. 7, 2010, pp. 061007-14.

172. Xu, C., and Faghri, A., "Water Transport Characteristics in a Passive Liquid-Feed DMFC," International Journal of Heat and Mass Transfer, Vol. 53, 2010, pp. 1951-1966.

171. Wang, S., Faghri, A., and Bergman, T.L., "A Comprehensive Numerical Model for the Melting with Natural Convection, "International Journal of Heat and Mass Transfer, Vol. 53, 2010, pp.1986-2000.

170. Xiao, B., and Faghri, A., " Numerical Analysis for a Vapor Feed Miniature Direct Methanol Fuel Cell System," International Journal of Heat and Mass Transfer, Vol. 52, 2009, pp. 3525-3533.

169. Jewett, G., Guo, Z., and Faghri, A., "Performance Characteristics of a Vapor Feed Passive Miniature Direct Method Fuel Cell," International Journal of Heat and Mass Transfer, Vol. 52, 2009, pp 4573-4583,

168. Jewett, G, Faghri, A., and Xiao, B., "Optimization of Water and Air Management Systems for a Passive Direct Methanol Fuel Cell, "International Journal of Heat and Mass Transfer, Vol. 52, 2009, pp. 3564-3575.

167. Faghri, A. and Guo, Z., "An Innovative Passive DMFC Technology," Applied Thermal Engineering, Vol. 28, No. 13, 2008, pp. 1614-1622.

166. Bergman, T.L., Faghri, A. and Viskanta, R., "Frontiers in Transport Phenomena Research and Education: Energy systems, Biological Systems, Security, Information Technology and Nanotechnology," International Journal of Heat and Mass Transfer, Vol.51, 2008 , pp. 4599-4613.

165. Guo, Z., and Faghri, A., "Thermal Behavior of a Novel Micro Fuel Cell Based Methanol Concentration Sensor," Applied Thermal Engineering, Vol. 28, No. 13, 2008, pp. 1605-1613.

164. Rice, J., and Faghri, A., "Thermal and Start-up Characteristics of a Miniature Passive Liquid Feed DMFC System, including Continuous /Discontinuous Phase Limitations," ASME Journal of Heat Transfer, Vol. 130, No. 6, 2008, pp. 062001-11.

163. Xiao, B. and Faghri, A., "A Three-Dimensional Thermal --Fluid Analysis of Flat Heat Pipes," International Journal of Heat and Mass Transfer, Vol. 51, 2008, pp. 3113-3126.

162. Faghri, A., and Guo, Z, "Integration of Heat Pipe in to Fuel Cell Technology," Heat Transfer Engineering, Vol. 29, No. 3, 2008, pp. 232-238.

161. Xiao, B. and Faghri, A., "Transient Modeling and Analysis of Methanol Transport in a Passive Liquid Feed DMFC," International Journal of Heat and Mass Transfer, Vol. 51, 2008, pp. 3127-3143.

160. Rice, J. and Faghri, A., "Analysis of a Passive Vapor Feed Direct Methanol Fuel Cell," International Journal of Heat and Mass Transfer, Vol. 51, 2008, pp. 948-959.

159. Guo, Z., and Faghri, A., "Development of a 1W Passive DMFC," International Communications in Heat and Mass Transfer, Vol. 35, 2008, pp. 225-239.

158. Zhang, Y. and Faghri, A., "Advances and Unresolved Issues in Pulsating Heat Pipes," Heat Transfer Engineering, Vol. 29, No.1, 2008.

157. Rice, J. and Faghri, A., "Analysis of Porous Wick Heat Pipes, Including Capillary Dry-out Limitations," AIAA Journal of Thermophysics and Heat Transfer, Vol. 21, No. 3, 2007, pp. 475-486.

156. Jewett, G., Guo, Z., and Faghri, A., "Water and Air Management System for a Passive Direct Methanol Fuel Cell," Journal of Power Sources, Vol. 168, 2007, pp. 434 -- 446.

155. Rice J., and Faghri, A., "Analysis of the Marangoni Effect in Volatile Liquids Evaporating from Capillary Tubes Using a New Interface Tracking Method," Numerical Heat Transfer, Part A, Vol. 51, 2007, pp. 445-468.

154. Guo, Z., and Faghri, A., "Vapor Feed Direct Methanol Fuel Cells with a Passive Thermal-Fluids Management System," Journal of Power Sources, Vol. 167, 2007, pp. 378-390.

153. Rice, J., and Faghri, A., "A Transient, Multiphase and Multi-Component Model of a New Passive Miniature DMFC," International Journal of Heat and Mass Transfer, Vol. 49, 2006, pp. 4804-4820.

152. Guo, Z., and Faghri, A., "Miniature DMFCs with Passive Thermal Fluids Management System", Journal of Power Sources, Vol. 160, No. 2, 2006, pp. 1142-1155.

151. Guo, Z., and Faghri, A., "Development of Planar Air-Breathing Direct Methanol Fuel Cell Stacks," Journal of Power Sources, Vol. 160, No. 2, 2006, pp. 1183-1194.

150. Rice, J., and Faghri, A., "A New Computational Method for Free Surface Problems," Numerical Heat Transfer, Vol. 49, No. 5, 2006, pp. 409-436.

149. Holley, B., and Faghri, A., "Permeability and Effective Pore Radius Measurements for Heat Pipe and Fuel Cell Applications," Journal of Applied Thermal Engineering, Vol. 26, No. 4, 2006, pp. 448-462.

148. Faghri, A., "Unresolved Issues in Fuel Cell Modeling", Heat Transfer Engineering, Vol. 27, No. 1, 2006, pp. 1-3.

147. Holley, B., and Faghri, A., "Analysis of Pulsating Heat Pipe with Capillary Wick and Varying Channel Diameter," International Journal of Heat and Mass Transfer, Vol. 48, No. 13, 2005, pp. 2635-2651.

146. Rice, J., Faghri, A., and Cetegen, B., "Analysis of a Free Surface Film from a Controlled Liquid Impinging Jet over a Rotating Disk Including Conjugate Effects, With and Without Evaporation," International Journal of Heat and Mass Transfer, Vol. 48, 2005, pp. 5192-5204.

145. Faghri, A., and Guo, Z., "Challenges and Opportunities of Thermal Management Issues Related to Fuel Cell Technology and Modeling," International Journal of Heat & Mass Transfer, Vol. 48, Issue 19/20, 2005, pp 3891-3920.

144. Ozar, B., Cetegen, B. M., and Faghri A., "Experiments on Heat Transfer in a Thin Liquid Film Flowing over a Rotating Disk," ASME Journal of Heat Transfer, Vol. 126, No. 2, 2004, pp. 184-192.

143. Zhang, Y., and Faghri, A., "Oscillatory Flow in Pulsating Heat Pipes with Arbitrary Number of Turns," AIAA Journal of Thermophysics and Heat Transfer, Vol. 17, No. 3, 2003, pp. 340-347.

142. Begg, E., Holley, B., and Faghri, A., "Condensation Heat Transfer and Pressure Drop Measurements in Miniature Horizontal Tubes with Low Mass Flux Rates," Journal of Enhanced Heat Transfer, Vol 10, No. 3, 2003, pp. 335-353

141. Ozar, B., Cetegen, B. M., and Faghri, A., "Experiments on the Flow of a Thin Liquid Film over a Horizontal Stationary and Rotating Disk Surface," Experiments in Fluids, Vol. 34, 2003, pp. 556-565.

140. Shafii, M. B., Faghri, A., and Zhang, Y., "Analysis of Heat Transfer in Un looped and Looped Pulsating Heat Pipes," International Journal of Numerical Methods for Heat and Fluid Flow, Vol. 12, No. 5, 2002, pp. 585-609.

139. Zhang, Y., Faghri, A., and Shafii, M. B., "Analysis of Liquid-Vapor Pulsating Flow in an U-Shaped Miniature Tube," International Journal of Heat and Mass Transfer, Vol. 45, No. 12, 2002, pp. 2501-2508.

138. Zhang, Y., and Faghri, A., "Heat Transfer in a Pulsating Heat Pipe with Open End," International Journal of Heat and Mass Transfer, Vol. 45, No. 4, 2002, pp. 755-764.

137. Shafii, M. B., Faghri, A., and Zhang, Y., "Thermal Modeling of Unlooped and Looped Pulsating Heat Pipes," ASME Journal of Heat Transfer, Vol. 123, No. 6, 2001, pp. 1159-1172.

136. Tabatabai, Ahmadali and Faghri, A., "A New Two-Phase Flow Map and Transition Boundary Accounting for Surface Tension Effect in Horizontal Miniature and Micro Tubes," ASME Journal of Heat Transfer, Vol. 123, No. 5, 2001, pp. 958-968.

135. Zhang, Y., and Faghri, A., "Numerical Simulation of Condensation on a Capillary Grooved Structure," Numerical Heat Transfer, Part A, Vol. 39, 2001, No. 3, pp. 227-243.

134. Faghri, A., "Advances and Challenges in Micro/Miniature Heat Pipes," Annual Review of Heat Transfer, Vol. 12, 2001, pp. 1-26.

133. Zhang, Y., Faghri, A., and Shafii, M., "Capillary Blocking in Forced Convective Condensation in Horizontal Miniature Channels," ASME Journal of Heat Transfer, Vol. 123, No. 3, 2001, pp. 501-511.

132. Faghri, A., Dhir, V., and Jaluria, Y., "Comments on a Recent Review of Incropera and DeWitts's Text," International Journal of Heat and Mass Transfer, Vol. 43, 2000, pp. 162-163.

131. Zhang, Y., Faghri, A., Buckley, C. W., and Bergman, T., "Three Dimensional Sintering of Two Component Metal Powders with Stationary and Moving Laser Beams," ASME Journal of Heat Transfer, Vol. 122, No. 1, 2000, pp. 150-158.

130. Zhang, Y. and Faghri, A., "Thermal Modeling of Selective Area Laser Deposition of Titanium Nitride on a Finite Slab with Stationary and Moving Laser Beams," International Journal of Heat and Mass Transfer, Vol. 43, No. 20, 2000, pp. 3835-3846.

129. Begg, E., Khrustalev, D., and Faghri, A., "Complete Condensation of Forced Convection Two-Phase Flow in a Miniature Tube," ASME Journal of Heat Transfer, Vol. 121, No. 4, 1999, pp. 904-915.

128. Khrustalev, D., and Faghri, A., "Coupled Liquid and Vapor Flow In Miniature Passages with Micro Grooves," ASME Journal of Heat Transfer, Vol. 121, No. 3, 1999, 729-733.

127. Lin, Lanchao, and Faghri, A., "Heat Transfer in the Micro Region of a Rotating Miniature Heat Pipe," International Journal of Heat and Mass Transfer, Vol. 42, 1999, pp. 1363-1369.

126. Zhang, Y., and Faghri, A., "Melting of a Subcooled Mixed Powder Bed with Constant Heat Flux Heating," International Journal of Heat and Mass Transfer, Vol. 42, No. 5, 1999, pp. 775-788.

125. Zhang, Y., and Faghri, A., "Vaporization, Melting and Heat Conduction in the Laser Drilling Process," International Journal of Heat and Mass Transfer, Vol. 42, No. 10, 1999, pp. 1775-1790.

124. Hopkins, R., Faghri, A., and Khrustalev, D., "Flat Miniature Heat Pipes With Micro-Capillary Grooves," ASME Journal of Heat Transfer, Vol. 121, No. 1, 1999, pp. 102-109.

123. Hopkins, R., Faghri, A., and Khrustalev, D., "Critical Heat Fluxes In Flat Miniature Heat Sinks With Micro-Capillary Grooves," ASME Journal of Heat Transfer, Vol. 121, No. 1, 1999, pp. 217-220.

122. Khalkhali, H., Faghri, A., and Zuo, Z., "Entropy Generation in Heat Pipe Systems," Applied Thermal Engineering, Vol. 19, 1999, pp. 1027-1043.

121. Zhang, Y., and Faghri, A., "Melting and Resolidification of a Subcooled Mixed Powder with Moving Gaussian Heat Source," ASME Journal of Heat Transfer, Vol. 120, No. 4, 1998, pp. 883-891.

120. Lin, L., and Faghri, A., "Condensation in a Rotating Stepped Wall Heat Pipe with Hysteretic Annular Flow," AIAA Journal of Thermophysics and Heat Transfer, Vol. 12, No. 1, 1998, pp. 94-99.

119. Zuo, Z. J., and Faghri, A., "A Network Thermodynamic Analysis of the Heat Pipe," International Journal of Heat and Mass Transfer, Vol. 14, No. 11, 1998, pp. 1473-1484.

118. Lin, L., and Faghri, A., "An Analysis of Two-Phase Flow Stability in a Thermosyphon with Tube Separator," Journal of Applied Journal Engineering, Vol. 18, No. 6, 1998, pp. 441-451.

117. Zuo, Z. J., Faghri, A., and Langston, L., "Numerical Analysis of Heat Pipe Turbine Vane Cooling," ASME Journal of Engineering for Gas Turbines & Power, Vol. 120, 1998, pp. 735-743.

116. Zhang, Y., and Faghri, A., "A Thermal Analysis for Mushy Zone Formation in Binary Solutions," ASME Journal of Solar Energy Engineering, Vol. 120, No. 7, 1998, pp. 144-147.

115. Lin, L., and Faghri, A., "Steady-State Performance of a Rotating Miniature Heat Pipe," AIAA Journal of Thermophysics and Heat Transfer, Vol. 11, No. 4, 1997, pp. 513-518.

114. Lin, L., and Faghri, A., "Steady-State Performances in a Thermosyphon with Tube Separator," Journal of Applied Thermal Engineering, Vol. 17, No. 7, 1997, pp. 667-679.

113. Khrustalev, D., and Faghri, A., "Thick Film Phenomenon in High Heat Flux Evaporation from Cylindrical Pores," ASME Journal of Heat Transfer, Vol. 119, No. 2, 1997, pp. 272-278.

112. Zuo, Z. J., and Faghri, A., "A Boundary Element Approach to Transient Heat Pipe Analysis," Numerical Heat Transfer, Vol. 33, No. 3, 1997, pp. 205-220.

111. Faghri, A., and Khrustalev, D., "Advances in Modeling of Enhanced Flat Miniature Heat Pipes with Capillary Grooves," Journal of Enhanced Heat Transfer, Vol. 4, 1997, pp. 99-109.

110. Lin, L., and Faghri, A., "Heat Transfer Analysis of Stratified Flow in Rotating Heat Pipes with Cylindrical and Stepped Walls," International Journal of Heat and Mass Transfer, Vol. 40, No. 18, 1997, pp. 4393-4404.

109. Ganesh, R. K., Faghri, A., and Hahn, Y., "A Generalized Thermal Modeling for Laser Drilling Process, Part 2: Numerical Simulation and Results," International Journal of Heat and Mass Transfer, Vol. 40, No. 14, 1997, pp. 3361-3373.

108. Ganesh, R. K., Faghri, A., and Hahn, Y., "A Generalized Thermal Modeling for Laser Drilling Process, Part 1: Mathematical Modeling and Numerical Methodology," International Journal of Heat and Mass Transfer, Vol. 40, No. 14, 1997, pp. 3351-3360.

107. Zhang, Y., and Faghri, A., "Analysis of Freezing in an Eccentric Annulus," ASME Journal of Solar Energy Engineering, Vol. 119, No. 3, 1997, pp. 237-241.

106. Faghri, A., "Heat Sink with Microchannels: Heat Transfer & Fluid Flow," Subsection, pp. 188-191, in 1997 McGraw-Hill Yearbook of Science & Technology, 1997.

105. Faghri, A., "Recent Advances in Heat Pipe Analysis and Simulation," Annual Review of Heat Transfer, Volume 8 (ARHT-VIII), 1997.

104. Zhang, Y., Chen, Z., and Faghri, A., "Heat Transfer During Solidification Around a Horizontal Tube With Internal Convection Cooling," ASME Journal of Solar Energy Engineering, Vol. 119, No. 1, 1997, pp. 44-47.

103. Khrustalev, D., and Faghri, A., "Boiling Heat Transfer in the Miniature Axially-Grooved Rectangular Channel With Discrete Heat Sources," Journal of Enhanced Heat Transfer, Vol. 4, No. 3, 1997, pp. 163-174.

102. Khrustalev, D., and Faghri, A., "Fluid Flow Effects in Evaporation from Liquid/Vapor Meniscus," ASME Journal of Heat Transfer, Vol. 118, 1996, pp. 725-730.

101. Zhang, Y., and Faghri, A., "An Internal Approximate Solution of Heat Transfer in the Grinding Process," International Journal of Heat & Mass Transfer, Vol. 39, No. 13, 1996, pp. 2653-2662.

100. Zhang, Y., and Faghri, A., "Heat Transfer Enhancement in Latent Heat Thermal Energy Storage System by Using the Internally Finned Tube," International Journal of Heat & Mass Transfer, Vol. 39, No. 15, 1996, pp. 3165-3173.

99. Zhang Y., ands Faghri, A., "Heat Transfer Enhancement in Latent Heat Thermal Energy Storage System by Using External Radial Finned Tubes," Journal of Enhances Heat Transfer, Vol. 3, No. 2, 1996, pp. 119-127.

98. Khrustalev, D., and Faghri, A., "Enhanced Flat Miniature Axially Grooved Heat Pipe," ASME Journal of Heat Transfer, Vol. 118, No. 1, 1996, pp. 261-264.

97. Khrustalev, D. and Faghri, A., "High Flux Evaporative Mini-Channel Heat Sink With Axial Capillary Grooves," Journal of Enhanced Heat Transfer, Vol. 3, No. 3, 1996, pp. 221-232

96. Zhang, Y. and Faghri, A., "Semi-Analytical Solution of Thermal Energy Storage System with Conjugate Laminar Forced Convection," International Journal of Heat and Mass Transfer, Vol. 39, No. 4, 1996, pp. 717-724.

95. Khrustalev, D. and Faghri, A., "Estimation of the Maximum Heat Flow in the Inverted Meniscus Type Evaporator of the Flat Miniature Heat Pipe," International Journal of Heat and Mass Transfer, Vol. 39, No. 9, 1996, pp. 1899-1909.

94. Zhang, Y., and Faghri, A., "Analysis of Forced Convection Heat Transfer in Microcapsulated Phase-Change Material Suspensions," AIAA Journal of Thermophysics and Heat Transfer, Vol. 9, No. 4, 1995, pp. 727-732.

93. Zhang, Y. and Faghri, A., "Analysis of Thermal Energy Storage System with Conjugate Turbulent Forced Convection," AIAA Journal of Thermophysics and Heat and Mass Transfer, Vol. 9, No. 4, 1995, pp. 722-726.

92. Faghri, A., Gogineni, S., and Cao, Y., "Fluid Flow Analysis in an Axially Rotating Porous Pipe with Mass Injection at the Wall," Numerical Heat Transfer Part A: Applications, Vol. 28, No. 6, 1995, pp. 723-737.

91. Khrustalev, D. and Faghri, A., "Heat Transfer in the Inverted Meniscus Type Evaporator at High Heat Fluxes," International Journal of Heat and Mass Transfer, Vol. 38, No. 16, 1995, pp. 3091-3101.

90. Khrustalev, D. and Faghri, A., "Thermal Characteristics of Conventional and Flat Miniature Axially-Grooved Heat Pipes," ASME Journal of Heat Transfer, Vol. 117, No. 4, 1995, pp. 1048-1054.

89. Khrustalev, D. and Faghri, A., "Heat Transfer During Evaporation on Capillary-Grooved Heat Pipes," ASME Journal of Heat Transfer, Vol. 117, No. 3, 1995, pp. 740-747.

88. Harley, C. and Faghri, A., "Two-Dimensional Rotating Heat Pipe Analysis," ASME Journal of Heat Transfer, Vol. 117, No. 1, 1995, pp. 202-208.

87. Faghri, A., "Recent Advances in Numerical Analysis of Heat Pipes," Journal of Computational Mechanics, Vol. 15, No. 5, 1994, pp. 480-491.

86. Cao, Y. and Faghri, A., "Micro/Miniature Heat Pipes and Operating Limitations," Journal of Enhanced Heat Transfer, Vol. 1, No. 3, 1994, pp. 265-274

85. Zeng, X. and Faghri, A., "A Temperature Transforming Model for Binary Solid-Liquid Phase Change Problems: Part II- Numerical Simulation," Numerical Heat Transfer Part B- Fundamental, Vol. 25, Issue 4, 1994, pp. 481-500.

84. Cao, Y. and Faghri, A., "Analytical Solution of Flow and Heat Transfer in a Porous Structure with Partial Heating and Evaporation on the Upper Surface," International Journal of Heat and Mass Transfer, Vol. 37, No. 10, 1994, pp. 1525-1533.

83. Faghri, A. and Harley, C., "Transient Lumped Heat Pipe Analysis," The Journal of Heat Recovery Systems & CHP, Vol. 14, No. 4, 1994, pp. 351-363.

82. Harley, C. and Faghri, A., "Complete Transient Two-Dimensional Analysis of Two-Phase Closed Thermosyphons Including the Falling Condensate Film," ASME Journal of Heat Transfer, Vol. 116, No. 2, 1994, pp. 418-426.

81. McDonough, M. W. and Faghri, A., "Experimental and Numerical Analysis of Natural Convection of Water Through its Density Maximum in a Rectangular Enclosure," International Journal of Heat and Mass Transfer, Vol. 37, Nov. 5, 1994, pp. 783-801.

80. Zeng, X. and Faghri, A., "Experimental and Numerical Study of Microwave Thawing Heat Transfer for Food Materials," ASME Journal of Heat Transfer, Vol. 116, No. 2, 1994, pp. 446-455.

79. Harley, C. and Faghri, A., "Transient Two-Dimensional Gas-Loaded Heat Pipe Analysis," ASME Journal of Heat Transfer, Vol. 116, No. 3, 1994, pp. 716-723.

78. Zeng, X. and Faghri, A., "Temperature-Transforming Model for Binary Solid-Liquid Phase Change Problems: Part I- Mathematical Modeling and Numerical Methodology," Numerical Heat Transfer Part B- Fundamental, Vol. 25, Issue 4, 1994, pp. 467-480.

77. Cao, Y. and Faghri, A., "Conjugate Analysis of a Flat-Plate Evaporator for Capillary Pumped Loops with Three-Dimensional Vapor Flow in the Groove," International Journal of Heat and Mass Transfer, Vol. 37, No. 3, 1994, pp. 401-409.

76. Khrustalev, D. and Faghri, A., "Thermal Analysis of a Micro Heat Pipe," ASME Journal of Heat Transfer, Vol. 116, No. 1, 1994, pp. 189-198.

75. McDonough, M. W. and Faghri, A., "Ultrasonic Measurement of Interface Positions During the Solidification of an Aqueous Sodium Carbonate Solution Around a Vertical Cylinder," Experimental Heat Transfer Journal, Vol. 6, No. 3, 1993, pp. 215-230.

74. McDonough, M. W. and Faghri, A., "Ultrasonic Measurement of Solid-Liquid Interface for the Solidification of Water in a Rectangular Enclosure," ASME Journal of Heat Transfer, Vol. 115, No. 4, 1993, pp. 1075-1078.

73. Rahman, M. M. and Faghri, A., "Transport in a Thin Liquid Film on the Outer Surface of a Wedge or Cone Embedded in a Porous Medium, Part II: Computation and Comparison of Results," International Communications in Heat and Mass Transfer, Vol. 20, No. 1, 1993, pp. 29-42.

72. Cao, Y. and Faghri, A., "Conjugate Modeling of High Temperature Nosecap and Wing Leading Edge Heat Pipes," ASME Journal of Heat Transfer, Vol. 115, No. 3, 1993, pp. 819-822.

71. Faghri, A., Gogineni, S., and Thomas, S., "Vapor Flow Analysis in an Axially Rotating Heat Pipe," International Journal of Heat and Mass Transfer, Vol. 36, No. 9, 1993, pp. 2293-2303.

70. Cao, Y. and Faghri, A., "A Numerical Analysis of High Temperature Heat Pipe Startup From the Frozen State," ASME Journal of Heat Transfer, Vol. 115, No. 1, 1993, pp. 247-254.

69. Faghri, A., Thomas, S., and Rahman, M. M., "Conjugate Heat Transfer From a Heated Disk to a Thin Liquid Film Formed by a Controlled Impinging Jet," ASME Journal of Heat Transfer, Vol. 115, No. 1, 1993, pp. 116-123.

68. Cao, Y. and Faghri, A., "Simulation of the Early Startup Period of High Temperature Heat Pipes From the Frozen State by a Rarefied Vapor Self-Diffusion Model," ASME Journal of Heat Transfer, Vol. 115, No. 1, 1993, pp. 239-246.

67. Rahman, M. M. and Faghri, A., " Gas Absorption and Solid Dissolution in a Thin Liquid Film on a Rotating Disk," International Journal of Heat and Mass Transfer, Vol. 36, No. 1, 1993, pp. 189-199.

66. Schmalhofer, J. and Faghri, A., "A Study of Circumferentially Heated and Block-Heated Heat Pipes, Part II: A Complete Three-Dimensional Numerical Modeling as a Conjugate Problem," International Journal of Heat and Mass Transfer, Vol. 36, No. 1, 1993, pp. 213-226.

65. Schmalhofer, J. and Faghri, A., "A Study of Circumferentially Heated and Block-Heated Heat Pipes, Part I: Experimental Analysis and Generalized Analytical Prediction of Capillary Limits," International Journal of Heat and Mass Transfer, Vol. 36, No. 1, 1993, pp. 201-212.

64. Rahman, M. M. and Faghri, A., "Transport in a Thin Liquid Film on the Outer Surface of a Wedge or Cone Embedded in a Porous Medium, Part I: Mathematical Analysis," International Communications in Heat and Mass Transfer, Vol. 20, No. 1, 1993, pp. 15-27.

63. Cao, Y. and Faghri, A., "Closed-Form Analytical Solutions of High Temperature Heat Pipe Startup and the Frozen Startup Limitations," ASME Journal of Heat Transfer, Vol. 114, No. 4, 1992, pp. 1028-1035.

62. Yerkes, K. L. and Faghri, A., "Flow Visualization of Mixed Convection in Large Chambers With and Without Heat Sources," International Communications in Heat and Mass Transfer, Vol. 19, 1992, pp. 749-764.

61. Schutte, D., Rahman, M. M., and Faghri, A., "Transient Conjugate Heat Transfer in a Thick-Walled Pipe with Developing Laminar Flow," Numerical Heat Transfer, Part A, Vol. 21, 1992, pp. 163-186.

60. Faghri, A., "Frozen Start-Up Behavior of Low Temperature Heat Pipes," International Journal of Heat and Mass Transfer, Vol. 35, No. 7, 1992, pp. 1681-1694.

59. Rahman, M. M. and Faghri, A., "Analysis of Heating and Evaporation From a Liquid Film Adjacent to a Horizontal Rotating Disk," International Journal of Heat and Mass Transfer, Vol. 35, No. 10, 1992, pp. 2644-2655.

58. Cao, Y. and Faghri, A., "A Study of Thermal Energy Storage Systems with Conjugate Turbulent Forced Convection," ASME Journal of Heat Transfer, Vol. 114, No. 4, 1992, pp. 1019-1027.

57. Rahman, M. M., Faghri, A., and Hankey, W L., "Fluid Flow and Heat Transfer in a Radially-Spreading Thin Liquid Film," Journal of Numerical Heat Transfer, Part A, Vol. 21, 1992, pp. 71-90.

56. Cao, Y. and Faghri, A., "Transient Multidimensional Analysis of Nonconventional Heat Pipes with Uniform and Non-uniform Heat Distribution," ASME Journal of Heat Transfer, Vol. 113, No. 4, 1992, pp. 995-1002.

55. Rahman, M. M. and Faghri, A., "Numerical Simulation of Fluid Flow and Heat Transfer in a Thin Liquid Film Over a Rotating Disk," International Journal of Heat and Mass Transfer, Vol. 35, No. 6, 1992, pp. 1441-1453.

54. Yerkes, K. and Faghri, A., "Mixed Convection Analysis in Large Baffled Rectangular Chambers with Internal Heat Sources," International Journal of Heat and Mass Transfer, Vol. 35, No. 5, 1992, pp. 1209-1228.

53. Rose, M., Frank, Hyder, A. K., Askew, R. F., Chow, L. C., Gilmour, A. S., and Faghri, A., "Novel Techniques for the Thermal Management of Space-Based, High-Power Microwave Tubes," IEEE Transactions of Electronic Devices, Vol. 38, No. 10, 1991, pp. 2252-2263.

52. Faghri, A. and Chow, L. C., "Annular Condensation Heat Transfer in a Microgravity Environment," International Communications in Heat and Mass Transfer, Vol. 18, No. 5, 1991, pp. 715-729.

51. Faghri, A., Buchko, M., and Cao, Y., " A Study of High Temperature Heat Pipes with Multiple Heat Sources and Sinks, Part I: Experimental Methodology and Frozen Startup Profiles," ASME Journal of Heat Transfer, Vol. 113, No. 4, 1991, pp. 1003-1009.

50. Faghri, A., Buchko, M., and Cao, Y., "A Study of High Temperature Heat Pipes with Multiple Heat Sources and Sinks, Part II: Analysis of Continuum Transient and Steady State Experimental Data with Numerical Prediction," ASME Journal of Heat Transfer, Vol. 113, No. 4, 1991, pp. 1010-1016.

49. Faghri, A. and Buchko, M., "Experimental and Numerical Analysis of Low Temperature Heat Pipes With Multiple Heat Sources," ASME Journal of Heat Transfer, Vol. 113, No. 3, 1991, pp. 728-734.

48. Rahman, M. M., Faghri, A., and Hankey, W. L., " Computation of Turbulent Flow in a Thin Liquid Layer of Fluid Involving a Hydraulic Jump," ASME Journal of Fluids Engineering, Vol. 113, No. 3, 1991, pp. 411-418.

47. Faghri, A. and Thomas, S., "An Approximate Solution of the Thermal-Entry-Length Fluid Flow and Heat Transfer Characteristics in Annuli With Blowing at the Walls," AIAA Journal of Thermophysics and Heat Transfer, Vol. 5, No. 3, 1991, pp. 446-448.

46. Jang, J., Faghri, A., and Chang W. S., "Analysis of the Transient One-Dimensional Compressible Vapor Flow in Heat Pipes," International Journal of Heat and Mass Transfer, Vol. 34, No. 8, 1991, pp. 2029-2037.

45. Yerkes, K. L. and Faghri, A., "An Experimental and Numerical Simulation of Mixed Convection in Large Baffled Rectangular Chambers," International Journal of Heat and Mass Transfer, Vol. 34, No. 6, 1991, pp. 1525-1542.

44. Thomas, S., Faghri, A., and Hankey, W. L., "Experimental Analysis and Flow Visualization of Thin Liquid Film on a Stationary Rotating Disk," ASME Journal of Fluids Engineering, Vol. 113, No. 1, 1991, pp. 73-80.

43. Cao, Y., Faghri, A., and Juhasz, A., "A PCM/Forced Convective Conjugate Transient Analysis of Energy Storage Systems with Annular and Counter-Current Flows," ASME Journal of Heat Transfer, Vol. 113, No. 1, 1991, pp. 37-42.

42. Rahman, M. M., Hankey, W., Faghri, A., "Analysis of the Fluid Flow and Heat Transfer in a Thin Liquid Film in the Presence and Absence of Gravity," International Journal of Heat and Mass Transfer, Vol. 34, No. 1, 1991, pp. 103-114.

41. Cao, Y. and Faghri, A., "Performance Characteristics of a Thermal Energy Storage Module: A Transient PCM/Forced Convection Conjugate Analysis," International Journal of Heat and Mass Transfer, Vol. 34, No. 1, 1991, pp. 93-101.

40. Cao, Y. and Faghri, A., "A Transient Two-Dimensional Compressible Analysis for High Temperature Heat Pipes with a Pulsed Heat Input," Numerical Heat Transfer, Part A, Vol. 18, No. 4, 1990, pp. 483-502.

39. Jang, J., Faghri, A., Chang, W. S., and Mahefkey, E. T., "Mathematical Modeling and Analysis of Heat Pipe Start-Up From the Frozen State," ASME Journal of Heat Transfer, Vol. 112, No. 3, 1990, pp. 586-594.

38. Rahman, M. M., Faghri, A., and Hankey, W. L., "New Methodology for the Computation of Free Surface Flow Using a Permeable Wall," Numerical Heat Transfer, Part B: Fundamentals, Vol. 18, No. 1, 1990, pp. 23-41.

37. Faghri, A., "Heat Transfer Characteristics in Annuli with Blowing or Suction at the Walls,"AIAA Journal of Thermophysics and Heat Transfer, Vol. 4, No. 1, 1990, pp. 59-66.

36. Rahman, M. M., Faghri, A., Hankey, W., and Swanson, T., "Computation of the Free Surface Flow of a Thin Liquid Film at Zero and Normal Gravity," Numerical Heat Transfer, Part A, Vol. 17, No. 1, 1990, pp. 53-71.

35. Rahman, M. M., Faghri, A., Hankey, W. L., and Swanson, T., "Prediction of Heat Transfer to a Thin Liquid Film in Plane and Radially Spreading Flows," ASME Journal of Heat Transfer, Vol. 112, No. 3, 1990, pp. 822-825.

34. Thomas, S., Hankey, W., Faghri, A., and Swanson, T., "One-Dimensional Analysis of the Hydrodynamic and Thermal Characteristics of Thin Film Flows Including the Hydraulic Jump and Rotation," ASME Journal of Heat Transfer, Vol. 112, No. 3, 1990, pp. 728-735.

33. Cao, Y. and Faghri, A., "Heat Transfer in Liquid Metals by Natural Convection," International Journal of Heat and Mass Transfer, Vol. 33, No. 6, 1990, pp. 1367-1370.

32. Chen, M. N. and Faghri, A., "An Analysis of the Vapor Flow and the Heat Conduction Through the Liquid-Wick and Pipe Wall in a Heat Pipe with Single or Multiple Heat Sources," International Journal of Heat and Mass Transfer, Vol. 33, No. 9, 1990, pp. 1945-1955.

31. Cao, Y. and Faghri, A., "A Numerical Analysis of Phase-Change Problems Including Natural Convection," ASME Journal of Heat Transfer, Vol. 112, No. 3, 1990, pp. 812-816.

30. Cao, Y. and Faghri, A., "Thermal Protection from Intense Localized Moving Heat Fluxes Using Phase-Change Materials," International Journal of Heat and Mass Transfer, Vol. 33, No. 1, 1990, pp. 127-138.

29. Faghri, A., Reynolds, D. B., Faghri, P., "Heat Pipes for Hands," Mechanical Engineering, Vol. 111, No. 6, 1989, pp. 72-75.

28. Faghri, A. and Seban, R. A., "Heat and Mass Transfer to a Turbulent Falling Film -- II," International Journal of Heat and Mass Transfer, Vol. 32, No. 9, 1989, pp. 1796-1798.

27. Faghri, A. and Chen, M. M., "Numerical Analysis of the Effects of Conjugate Heat Transfer, Vapor Compressibility and Viscous Dissipation in Heat Pipes," Numerical Heat Transfer Journal, Part A, Vol. 16,1989, pp. 389-405.

26. Cao, Y., Faghri, A., and Chang, W. S., "A Numerical Analysis of Stefan Problems for Generalized Multi-Dimensional Phase-Change Structures Using the Enthalpy Transforming Model," International Journal of Heat and Mass Transfer, Vol. 32, No. 7, 1989, pp. 1289-1298.

25. Cao, Y., Faghri, A., and Mahefkey, E. T., "The Thermal Performance of Heat Pipes with Localized Heat Input," International Journal of Heat and Mass Transfer, Vol. 32, No. 7, 1989, pp. 1279-1287.

24. Faghri, A., "Performance Characteristics of a Concentric Annular Heat Pipe, Part II, Vapor Flow Analysis," ASME Journal of Heat Transfer, Vol. 111, No. 4, 1989, pp. 851-857.

23. Faghri, A. and Thomas, S., "Performance Characteristics of a Concentric Annular Heat Pipe, Part I, Experimental Prediction and Analysis of the Capillary Limit," ASME Journal of Heat Transfer, Vol. 111, No. 4, 1989, pp. 844-850.

22. Faghri, A., Chen, M. M. and Morgan, M., "Heat Transfer Characteristics in Two-Phase Closed Conventional and Concentric Annular Thermosyphons," ASME Journal of Heat Transfer, Vol. 111, No. 3, 1989, pp. 611-618.

21. Faghri, A., Chen, M. M. and Mahefkey, E. T., "Simultaneous Axial Conduction in the Fluid and the Pipe Wall for Forced Convective Laminar Flow with Blowing and Suction at the Wall," International Journal of Heat and Mass Transfer, Vol. 32, No. 2, February 1989, pp. 281-288.

20. Faghri, A. and Seban, R., "Heat and Mass Transfer to a Turbulent Liquid Film," International Journal of Heat and Mass Transfer, Vol. 31, No. 4, 1988, pp. 891-894.

19. Faghri, A. and Chow, L. C., "Forced Condensation in a Tube with Suction at the Wall for Microgravity Applications," ASME Journal of Heat Transfer, Vol. 110, No. 4, November 1988, pp. 982-985.

18. Faghri, A., and Parvani, S., "Numerical Analysis of Laminar Flow in a Double-Walled Annular Heat Pipe," AIAA Journal of Thermophysics and Heat Transfer, Vol. 2, No. 3, 1988, pp. 165-171.

17. Faghri, A., "An Approach to Developing the Laboratory Through Senior Design Projects," Journal of Engineering Education, December 1987, pp. 184-186.

16. Faghri, A., " Vapor Flow Analysis in a Double-Walled Concentric Heat Pipe," Numerical Heat Transfer, Vol. 12, No. 6, December 1986, pp. 583-595.

15. Riazi, R. and Faghri, A., "Effect of the Interfacial Drag on Gas Absorption with Chemical Reaction in a Vertical Tube," AIChE Journal, Vol. 32, 1986, pp. 696-699.

14. Riazi, R. and Faghri, A., "Gas Absorption with Zero-Order Chemical Reaction," AIChE Journal, Vol. 31, No. 2, December 1985, pp. 1967-1972.

13. Riazi, R. and Faghri, A., "Solid Dissolution with First Order Chemical Reaction," Chemical Engineering Science, Vol. 40, No. 8, 1985, pp. 1601-1603.

12. Faghri, A. and Seban, R. A., "Heat Transfer in Wavy Liquid Films," International Journal of Heat and Mass Transfer, Vol. 28, 1985, pp. 506-509.

11. Riazi, R. and Faghri, A., "Prediction of the Thermal Conductivity of Gases at High Pressure," AIChE Journal, Vol. 31, 1985, pp. 164-167.

10. Riazi, R. and Faghri, A., "Thermal Conductivity of Liquids and Vapor Hydrocarbon Systems: Pentanes and Heavier at Low Pressure," Industrial & Engineering Chemistry, Processes Design and Development Journal, Vol. 24, 1985, pp. 398-401.

9. Faghri, A., Stewart, R. J. and Rainey, C. L., "Axial Variation of Local Heat Flux Along the Condenser Section of a Double Wall Artery High Capacity Heat Pipe," Research and Development of Heat Pipe Technology, Vol. I, 1984, pp. 108-112.

8. Seban, R. A. and Faghri, A., "Film Condensation in a Tube with a Closed Top," International Journal of Heat and Mass Transfer, Vol. 27, 1984, pp. 944-948.

7. Faghri, A., "Prediction of Heat and Mass Transfer for Absorption of a Gas to a Liquid Film," Numerical Methods in Thermal Problems, Vol. III, 1983, pp. 981-990.

6. Faghri, A. and Riazi, R., "Evaluation of the Momentum, Heat and Mass Transfer Diffusion Coefficients for Liquids," International Communications in Heat and Mass Transfer Journal, Vol. 10, 1983, pp. 385-394.

5. Faghri, A., Javdani, K., and Faghri, M., "The Effect of Flow Pulsation on Laminar Heat Transfer Between Two Parallel Plates," Journal Warme and Stoffubertragung, Vol. 13, 1980, pp. 97-102.

4. Faghri, M., Javdani, K., and Faghri, A., "Heat Transfer with Laminar Pulsating Flow in a Pipe," Letters in Heat and Mass Transfer Journal, Vol. 6, 1979, pp. 259-263.

3. Faghri, A. and Payvar, P., "Transport to Thin Falling Liquid Films," Reg. Journal of Energy Heat and Mass Transfer, Vol. 1, 1979, pp. 153-173.

2. Seban, R. A. and Faghri, A., "Wave Effects on the Transport to Falling Laminar Liquid Films," ASME Journal of Heat Transfer, Vol. 100, 1978, pp. 143-147.

1. Seban, R. A. and Faghri, A., "Evaporation and Heating with Turbulent Falling Liquid Films," ASME Journal of Heat Transfer, Vol. 98, 1976, pp. 315-318.