Professional Outcomes

Archival Journal Publications - 2006

"A transient, multi-phase and multi-component model of a new passive DMFC," J. Rice, A. Faghri, International Journal of Heat and Mass Transfer, Vol. 49, pp. 4804-4820, December 2006.

"Ultrathin reinforced nanocomposite membranes for direct methanol fuel cells," M.-K. Song, Y.-M. Kim, Y.-T. Kim, H.-W. Rhee, A. Smirnova, N.M. Sammes and J.M. Fenton, Journal of Electrochemical Society, Vol. 153 (12), pp. A2239-A2244, December, 2006.

"Rotating Disk Electrode Study of Supported and Unsupported Catalysts for PEMFC Application," F. Dundar, A. Smirnova, X. Dong, A. Ata, N. Sammes, ASME Journal of Fuel Cell Science and Technology, Vol. 3, Iss. 4, pp. 428-433, November 2006.

"Effects of Operating Parameters on the Current Density Distribution in Proton Exchange Membrane Fuel Cells," Y. Zhang, A. Mawardi, R. Pitchumani, ASME Journal of Fuel Cell Science and Technology, Vol. 3, Iss. 4, pp. 464-476, November 2006.

"Aerogel-Based PEMFC Catalysts Operating at Room Temperature," A. Smirnova, X. Dong, H. Hara, N. Sammes, ASME Journal of Fuel Cell Science and Technology, Vol. 3, Iss. 4, pp. 477-481, November 2006.

"Fabrication and Performance of Anode-Supported Micro-Tubular Solid Oxide Fuel Cells," J. Pusz, A. Mohammadi and N. Sammes, ASME Journal of Fuel Cell Science and Technology, Vol. 3, Iss. 4, pp. 482-486, November 2006.

"Anode supported LSCM-LSGM-LSM solid oxide fuel cell," A. Mohammadi, N.M. Sammes, J. Pusz, and A.L. Smirnova, Ceramic Engineering and Science Proceedings, Vol. 27, Iss. 4, pp. 27-34, November 2006.

"Cathode thermal delamination study for a planar solid oxide fuel cell with functional graded properties: Experimental investigation and numerical results," G. Ju, K. Reifsnider and J.-H. Kim, Ceramic Engineering and Science Proceedings, Vol. 27, Issue 4, pp. 161-173, November 2006.

"Effect of anisotropy of gas diffusion layers on two-phase heat and mass transport in polymer electrolyte fuel cells," U. Pasaogullari, P.P. Mukherjee, C.Y. Wang and K. S. Chen, ECS Transactions, Vol. 3 (1), pp. 1239-1248, November 2006.

"Spatially resolved optical measurements of water partial pressure and temperature in a PEM fuel cell under dynamic operating conditions," S. Basu, M.W. Renfro, B.M. Cetegen, Journal of Power Sources, Vol. 162, Iss. 1, pp. 286-293, November 2006.

"Model-based condition monitoring of PEM fuel cell using Hotelling T2 control limit," X. Xue, J. Tang, N. Sammes, Y. Ding, Journal of Power Sources, Vol. 162, Iss. 1, pp. 388-399, November 2006.

"Multifunctional Engineering Design of Elastomeric Components [Material Properties]," with K.L. Reifsnider, Z. Yue, R. Solasi and M. Feshler, Rubber Chemistry and Technology, Vol. 79, No. 5, pp. 881-891, November 2006.

"Multi-scale modeling approaches for functional nano-composite materials," K. Reifsnider, X. Huang, G. Ju, R. Solasi, Journal of Materials Science, Vol. 41, No. 20, pp. 6751-6759, October 2006.

"Mass Transfer in Graded Microstructure Solid Oxide Fuel Cell Electrodes,"E. S. Greene, W. K. S. Chiu and M. G. Medeiros, Journal of Power Sources, vol. 161, Iss. 1, pp. 225-231, October 2006.

"Miniature DMFCs with passive thermal-fluids management system," Z. Guo, A. Faghri, Journal of Power Sources, Vol. 160, Iss. 2, pp. 1142-1155, October 2006.

"Development of planar air breathing direct methanol fuel cell stacks," Z. Guo, A. Faghri, Journal of Power Sources, Vol. 160, Iss. 2, pp. 1183-1194, October 2006.

"Bismuth oxide doped scandia-stabilized zirconia electrolyte for the intermediate temperature sofc," S. Sarat, N. Sammes, A. Smirnova, Journal of Power Sources, Vol. 160, Iss. 2, pp. 892-896, September 2006.

"Effects of parameter uncertainty on the performance variability of proton exchange membrane (PEM) fuel cells," A. Mawardi, R. Pitchumani, Journal of Power Sources, Vol. 160, Iss. 1, pp. 232-245, September 2006.

"In situ simultaneous measurements of temperature and water partial pressure in a PEM fuel cell under state and dynamic cycling," S. Basu, M.W. Renfro, G. Gorgun, B.M. Cetegen, Journal of Power Sources, Vol. 159, Iss. 2, pp. 987-994, September 2006.

"Preparation of Supported Metallic Nanoparticles using Supercritical Fluids: A Review," Y. Zhang, C. Erkey, Journal of Supercritical Fluids, Vol. 38, Iss. 2, pp. 252-267, September 2006.

"Influence of temperature and relative humidity on performance and CO tolerance of PEM fuel cells with NafionŽ - TeflonŽ -Zr(HPO4)2 higher temperature composite membranes," R. Jiang, H.R. Kunz and J.M. Fenton, Electrochimica Acta, Vol. 51, iss. 26, pp. 5596-5605, August 2006.

"Assembling single cells to create a stack: The case of a 100 W microtubular anode-supported solid oxide fuel cell stack," N.M. Sammes, R. Bove and Y. Du, Journal of materials engineering and performance, Vol. 15, Iss. 4, pp. 463-467, August 2006.

"Metal dioxide supported heteropolyacid/Nafion composite membranes for elevated temperature/low relative humidity PEFC operation," V. Ramani, H.R. Kunz and J.M. Fenton, Journal of Membrane Science, Vol. 279, Iss. 1-2, 2006, pp. 506-512, August 2006.

"Influence of blend miscibility on the Proton Conductivity and Methanol Permeability of Polymer Electrolyte Blends," J.V. Gasa, R.A. Weiss, M.T. Shaw, Journal of Polymer Science, Part B: Polymer Physics, Vol. 44, Iss. 16, pp. 2253-2266, August 2006.

"Mechanical Endurance of Polymer Electrolyte Membrane and PEM Fuel Cell Durability," X. Huang, R. Solasi, Y. Zou, M. Feschler, K. Reifsnider, D. Condit, S. Burlatsky, T. Madden, Journal of Polymer Science, Part B: Polymer Physics, Vol. 44, Iss. 16, pp. 2346-2357, August 2006.

"Durability of (Pr 0.7 Sr 0.3)MnO 3+-?/8YSZ composite cathodes for SOFCs," K. An, K.L. Reifsnider, C.Y. Gao, Journal of Power Sources, Vol. 158, Iss. 1, pp. 254-262, July 2006.

"An algorithm for estimation of membrane water content in PEM fuel cells," H. Gorgun, M. Arcak, F. Barbir, Journal of Power Sources, Vol. 157, Iss. 1, pp. 389-394, June 2006.

"Preliminary results for a methanol fuelled SOFC tubular stack with nanocrystalline 8YSZ electrolyte," W.A.G. McPhee, W.E. Holden, J. Pusz, and N.M. Sammes, ECS Transactions, Vol. 2, Iss. 27, pp. 57-66, May 2006.

"Improvements to test rig for laboratory scale anode supported SOFC," W.E. Holden, W.A.G. McPhee, and N.M. Sammes, ECS Transactions, Vol. 2, Iss. 27, pp. 67-76, May 2006.

"Thin inclusion approach for modelling of heterogeneous conducting materials," N. Lavrov, A. Smirnova, H. Gorgun, N. Sammes, Journal of Power Sources, Vol. 155, Iss. 2, pp. 239-245, April 2006.

"In situ Optical Diagnostics for Measurements of Water Vapor in a PEM Fuel Cell," S. Basu, H. Xu, M. Renfro, B. Cetegen, ASME Journal of Fuel Cell Science and Technology, Vol. 3, Iss. 1, pp. 1-7, February 2006.

"Proton-exchange membranes composed of slightly sulfonated poly(ether ketone ketone) and highly sulfonated crosslinked polystyrene particles," J. Gasa, S. Boob, R.A. Weiss, M.T. Shaw, Journal of Membrane Science, Vol. 269, Iss. 1-2, pp. 177-186, February 2006.

"Electrical and Mechanical Behaviors of Carbon Nanotube-Filled Polymer Blends," M. Wu, L. Shaw, Journal of Applied Polymer Science, Vol. 99, Iss. 2, pp. 477-488, January 2006.

[ top | back ]